GSG-5 Replacement Screw Set

This is a Complete Set of High Grade Hex Head Screws with Bolts to replace the soft metal screws that come with any model of the GSG-5. The addition of the Nuts helps prevent stripping of the aluminum frame and helps to eliminate the loose screw problems that are causing cracked bolt carriers.
Included in this Replacement Screw Set are:
4 - socket cap screws, with nuts for the trigger assembly
3 - socket cap screws, with nuts for the bolt assembly
2 - socket cap screws, with nuts for the bolt assembly (these are the slightly smaller screws on the bolt assembly)
4 - socket cap screws, with nuts for the main receiver and two barrel block screws
1 - socket cap screw, with nut - this is the third barrel block screw (it needs to be a little longer to reach the nut)
1 - socket cap screw to replace bolt stop retaining screw
3 - button cap screws for the bolt jacket

*** Please Note - You will need some degree of skill to disassemble the carbine to the point that some of these screws can be installed. You can find clear disassembly instructions online. If you're not confident in your ability to do the work, please seek out help locally or online. We can't provide support regarding disassembly or re-assembly of your GSG-5. You will need a couple of torx screwdrivers as well as the screwdriver that came with the carbine to accomplish disassembly. For re-assembly you will only need a couple of allen wrenches. Don't over-tighten!